FTDI Chip Usb to RS232 25 Pin DB25 Male Connector Serial Adapter Cable CNC Controls Programming Cable Compatib C-232R US-232R
6ft industrial grade USB to RS232(DB25 Male) adapter cable. It is an ideal solution for computer to communicate with many serial devices directly through USB port such as CNC, PLC, plotter, modem, Scanner etc
This cable is designed to make connection between USB port and serial devices(RS232), NOT for parallel printer or other devices based on parallel protocol (IEEE-1284), even though both have DB25 connector. It is a USB to Serial cable with Software Handshaking using only three signals: TXD(Pin2), RXD(pin3) and GND(pin7). Check your devices setup prior to purchase.
Works with USB 1.1 & 2.0 Host and Hub ports. Powered directly by USB port, no external power adapter required.
Industry Standard FTDI chip set & device drivers to ensure maximum compatibility and superior reliability for industrial application. FTDI driver download: http://www.ftdichip.com/Drivers/VCP.htm; Driver Installation Guide:http://www.ftdichip.com/Support/Documents/InstallGuides.htm; FT232RL datasheet:http://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT232R.pdf
This adapter cable is well-suited for use in industrial control systems where standard RS232 connections are required but are not feasible due to limited cable length or connectivity constraints.
